Skip to main content

The BCER is lifting the suspension of industry water diversion or use for select rivers in the Peace River and Liard River Watersheds.

DATE ISSUED: May 25, 2026
EFFECTIVE DATE: Immediately

Due to a healthy snowpack and slower start to spring in Northeast B.C., the BC Energy Regulator (BCER) is lifting the suspension of industry water diversion or use (permitted under Section 10 of the Water Sustainability Act) for select rivers in the Peace River and Liard River Watersheds.

The following table provides a summary of the remaining suspensions in the province.

Legend:

  • “Open” = water diversion/use allowed, as permitted
  • “Closed” = water diversion/use suspension in effect
Directive 2026 01

No additional BCER-issued water diversion/use suspensions are currently in place beyond those listed in the above table.

Diversion and use of water stored in dugouts or dams is not suspended. Basins across B.C. are being monitored and further suspensions of water diversion or use are possible depending on conditions.

Given local variability, it is possible some streams in the areas under suspension will have recovered sufficiently to allow some water withdrawal. The BCER will review new applications for diversion or use, or requests to use existing approvals, on a site-specific basis.

Permit holders can discuss suspensions with the BCER and submit requests for continued water diversion or use under existing Section 10 approvals by providing location-specific data and subject matter expert opinion relevant to local streamflow conditions.

Operators are requested to do the following to support their applications or requests to use existing Section 10 approvals:

  1. Limit the applications to water volumes and points of diversion that are realistic to the specific operational needs for the upcoming months.
  2. For new applications for diversion or use of water from rivers and streams, or to request use of existing approvals, include discharge measurements at the points of diversion or use to provide information on current flow conditions in relation to the volumes of water requested. The discharge measurements should be collected to an acceptable hydrometric standard by a qualified individual.
  3. For new applications for diversion or use from lakes, or reactivation of existing approvals, provide information on lake bathymetry:
    1. Surface area (hectares).
    2. Depth (metres). If lake depth information is not already available from provincial databases or previous surveys, obtain depth measurements at points along two transects representing the long and short lake axes, to determine maximum lake depth.
    3. Volume.

More information:

If you have any questions regarding this Directive, please contact:

Ryan Rolick, M.Sc., P.Geo.
Hydrologist
BC Energy Regulator
Ryan.Rolick@bc-er.ca
250-794-5213

Dax Bourke, CD.
Executive Director, Responsible Stewardship
BC Energy Regulator
Dax.Bourke@bc-er.ca
250-261-3786